Is Your Boat Safe?

April 2nd, 2014 · General News

Vespoli Meets FISA Flotation Standards

April 2, 2014

We are proud to announce that Vespoli  is the first, and only,  US racing shell manufacturer to meet the FISA Flotation Standard.  As the industry leader,  meeting the most advanced safety standards is an important part of our commitment to growing the great sport of rowing.

FISA  requires all boats used in their sanctioned events to carry a permanently mounted  plaque stating whether or not, it meets their  flotation standards.  To comply,  a boat containing a rower/crew cannot sink further than two inches above the seat and documentation proving this must be submitted to FISA.   Similar to the FISA  minimum boat weight rule and the coxswain weight minimum, the  responsibility of  “proof” rests with the boat users and is subject to random inspection.   Failure to meet any  FISA requirement can lead to disqualification.  We anticipate USRowing and RowingCanada will likely adopt this  flotation standard just as they have adopted all of the other FISA rules and regulations.

We began testing and qualification back in 2009 and finished all of our racing models from, singles to eights, last fall. All Vespoli models built since 2010 meet the FISA flotation standard.

We have installed water tight compartments and  newly designed, water tight hatches in each rower’s compartment  for the necessary buoyancy. Each eight, four and quad  also has two,  push out portal caps easily accessible to cox and/or rower  that allows water to flow out if the water level in the boat reaches nearly two inches above the seat.

Water Tight Hatch Cover                          Push Out Portal Caps

The  “passive” removal of water was tested and chosen over the method where rowers  in crew boats try to achieve sufficient stern-ward momentum to push the water out of a deck vent.  Trying to coordinate rowers in a stressful situation to forcefully move up the tracks to “slosh” out the water (up to a ton of extra weight)  increases the risk of capsizing.  When the water reaches the portal caps using our method, the caps are easily removed and incoming water flows out without requiring the crew to move.

When looking at new equipment you need to  look no further than Vespoli.  You can be assured you be investing in  the best in technology, service, value and SAFETY.

Contact your Team Vespoli Regional Representative for more information.

Share this post:
  • Facebook
  • Twitter
  • LinkedIn
  • email

0 responses so far ↓

  • There are no comments yet...Kick things off by filling out the form below.

Leave a Comment